Laser editor
Design a named keychain in the StencilCut laser editor
Start from a template, add a name, set it to engrave, run the laser check and export an SVG, DXF or LightBurn file, all in your browser.
0:49 Captions on the player Example results from demo files
Chapters
Transcript
0:02The StencilCut laser editor runs in your browser. Add shapes, icons, text or your own file from the panel on the left.
0:11Start from a template. Keychain blank sets the sheet to 70 by 35 millimetres and adds the tag.
0:18Press Text and type a name. It stays real text while you edit, and turns into outlines when you export.
0:25Set the laser job to Engrave, so the name is burned onto the tag instead of cut out.
0:31Press Check, then Run laser check. It flags pieces that fall out, like the middle of the keyring hole, and lines too thin to cut.
0:39Export an SVG or DXF at true size, or a LightBurn file, ready for your laser.